AUTONET TV

Ball Joint Replacement

Think about this the next time you’re driving.  Your front wheels can steer your vehicle and, at the same time, the wheels can move, even with all the irregularities in the road moving them up, down and in different directions. Pretty amazing engineering, wouldn’t you say?

What allows that are parts called ball joints.  Most vehicles have them only in the front, but there are some vehicles that have them in the rear as well.  When you consider all the bumps and turns your wheels are subjected to, it’s not hard to imagine the wear and tear these ball joints endure. After any vehicle has put on many months of road time, these ball joints will start to wear out. 

You may find your vehicle’s front wheels clunk when you are on the road, it may not hold the road as well when you go over a bump, or you may feel vibration in your steering wheel and your tires may start to wear unevenly.

When you start to notice any of these symptoms, it’s a good idea to bring it in to have one of our technicians look at what’s going on. If you keep driving with worn out ball joints, you can cause your tires to wear out more quickly.  And if you go even longer, you might find your suspension can collapse, meaning you won’t be able to keep your vehicle under control.  

Many vehicles have upper and lower ball joints, depending on what kind you are driving.  The upper ball joints usually don’t bear any weight while the lower ones do.

When our technician replaces your ball joints, they’ll take your wheels off, then remove the control arm(s).  After replacing the ball joints, they’ll inspect the rest of your suspension to make sure there aren’t any other components that need attention. In some cases, you’ll also need to have your wheels aligned after this service. 

So, when you hear those clunks or feel those vibrations, they may be signs your steering and control over your vehicle aren’t as good as they need to be for dependable, safe driving.  Heed the warning signs and keep your steering and suspension performing the way they’re designed to.  

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274

See the Light (Bulb Replacement)

When you notice one of your headlights has gone out, it’s important for the safe operation of your vehicle to get it changed and working again.  Not only is replacing a headlight important for your ability to see in the dark, but it’s also vital that it be lighting your way and aimed correctly so oncoming drivers aren’t blinded.  

Changing a headlight used to be something a driver might try to do themselves.  But that was back when headlights were standard sizes and fairly easy to access on your vehicle.  That has all changed with new technology and designs in today’s vehicles.  Most lamps are now LEDs, and there are different sizes, intensities, and shapes in different vehicles. Accessing those bulbs has also grown extremely difficult in some cases, and we recommend you have one of our professional technicians do it for you.

It's just as important that your brake lights and side marker lights work, too, as they contribute to the safe operation and visibility of your vehicle.  A technician will check to see what is causing a light not to illuminate, which could be a bulb, but also could be a problem with the electrical system in that bulb’s circuit.

Having all your lights working is not only a matter of convenience, but a matter of safety too.  So don’t be in the dark when you don’t have to be. Let our technicians light up your life a little by making sure all your bulbs are working right.

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274

Smooth Operator (Shock Absorbers)

When you are comfortably headed down the road, you may not realize how many of the imperfections in the driving surface are being smoothed out, so you hardly feel most of them.  You can thank your shock absorbers for a lot of that comfort, and it’s important to make sure you keep your shocks in good shape.

Newer vehicles have shock absorbers in the back wheels with another shock absorbing assembly in the front which may also have a spring component as well, called struts.  

Shock absorbers not only keep your vehicle traveling smoothly and comfortably, but they also contribute to its stability.  Increased stability will help you be able to handle sharp turns and sudden stops more easily.  Shocks also prolong the life of your tires because they’ll grip the road more tightly.  And a nice side benefit of that is your tires should last longer.  

After months hitting a lot of bumps on uneven road surfaces, eventually your shock absorbers will start to wear.  You may notice your vehicle begin to sway more when you go around a corner, and it might be more difficult to steer.  Your tires can start to wear unevenly, and the tread may show signs of cupping (flat spots).  

Other signs your shocks could need replacing is when you hit a hard bump in the road and your vehicle continues bouncing more than you remember.  Your shocks may have suffered extreme damage that can causes fluid inside to leak.  

If you notice any of these signs, head on over so we can check things out.  We also recommend you have your shocks regularly inspected so you can take care of problems before you start feeling some of those symptoms of wear.  Your vehicle’s manufacturer usually will include recommendations in your owner’s manual on how frequently you should have shocks inspected. 

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274

Don?t Meddle with the Pedal (Brake Caliper Replacement)

If you drive a newer vehicle, chances are it has disc brakes, and one of the components of that type of brake is called a brake caliper.  The caliper allows the pressure from your foot on the brake pedal to eventually move brake pads against discs in your wheels, which then slow and stop your vehicle.  

If you have disc brakes on all 4 wheels, your vehicle will have 4 calipers.  If you have them just on the front wheels, you’ll only have 2 calipers.  Because your wheels and brakes do their work outside and on the road surface, they are exposed to a lot of dirt and debris, as well as enduring heat, cold, moisture and tough treatment in daily driving.  

Your calipers have seals that are susceptible to the heat generated during the repetitive stops in normal driving, which can take a tough toll on those seals. If you drive when your vehicle’s brake pads and rotors are worn, you can ruin your calipers in the process.  

Here are a few signs that a caliper might be failing:  Your vehicle is pulling to one side when you apply the brakes.  Your pedal goes down to the floor when you push on it.  You hear squeaking from the wheels while braking.  You notice brake fluid on the pavement underneath your vehicle after you’ve parked it for a few hours.  

If you are getting any of those warning signs, it’s important to have one of our technicians determine what’s going on.  There are several brake components that contribute to your vehicle’s safe operation, including the calipers, pads, rotors, brake lines and brake fluid.  

Regular brake maintenance is recommended in your vehicle’s owner’s manual to prevent dangerous surprises.  And when you see issues, have your brakes serviced as soon as you see signs of trouble.

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274

What?s That Yellow Squiggly Line Anyway? (What Warning Lights Mean)

You may have noticed when you start your vehicle, you’ll see several symbols light up on the dash.  They’re different colors and shapes, and sometimes it’s hard to figure out what each of those symbols mean.

They are warning lights and symbolize something in your vehicle is sending you a message.  It’s the result of today’s vehicles having lots of computers.  The good thing about having so many of these warning lights is they can let you know there’s an issue in need of attention before a more serious failure.  

Sometimes it can be challenging to figure out what each light means, so here are some of the most common ones.  One looks like your vehicle’s engine from the side, the Check Engine light.  It alerts you to something as simple as a loose gas cap to a far more serious problem like an overheating engine.  When the Check Engine light comes on, bring it into our shop.  If it’s blinking or flashing, it likely has more urgent issues, so bring it in sooner.

Another warning light looks like a genie lamp with a drip at the end, and it’s the engine oil light. When it comes on, it means something’s wrong with the oil pressure, and that can be a sign of serious engine problems.  Don’t ignore the oil light and bring it in for service as soon as you can.

One warning light looks like an old-style thermometer with a bulb at the bottom and degree marks on the side sitting in fluid.  That’s all about your coolant level, and when it comes on, your engine may be overheating.  It’s another one that’s telling you to bring it in to us for service quickly.

When your brakes aren’t working right, a light comes on that looks like a circle with a pair of half circles at the sides and an exclamation mark in the middle. Driving with malfunctioning brakes is dangerous, and it’s another warning light that should prompt you to get your vehicle looked at very soon.

If you see a light on your dash you don’t understand, try looking it up in your owner’s manual or bring it into us so we can help decipher it.  Warning lights are there to help you, and so are we.

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274

No Fuel-ing! (Fuel Filter Replacement)

Your vehicle has a few filters you might be somewhat familiar with.  There’s the oil filter that removes impurities from your engine’s oil, and a couple of different kinds of air filters that prevent contaminants from getting into the engine and the cabin. But you may not know that your vehicle also has a fuel filter.

The fuel filter keeps contaminants such as particles and other foreign substances from making their way into the engine.  They can result from using lower quality fuel, driving in dirty or stop-and-go conditions, or simply what happens after many weeks and months of travel. 

At some point, your fuel filter will start to get clogged up and won’t let the fuel get to your engine easily.  You might notice some signs of that: your engine doesn’t have the power it used to, it may misfire when you accelerate, it may be harder to start, or it may stall while you’re driving.  You may notice your vehicle vibrating a lot when you’re idling.  

If you notice any of those symptoms in your vehicle, you should bring it in for us to take a look.  We can run diagnostics such as a fuel pressure test that will let us know if your fuel filter is finished or still has a little more life remaining.

Even better, it’s a good idea to replace the fuel filter BEFORE you start seeing symptoms.  Each vehicle’s manufacturer recommends an interval at which you should change your fuel filter.  Older vehicles may recommend it be changed fairly frequently, such as every 30,000 miles/50,000 km.  Newer vehicles from different manufacturers have much longer intervals, and that’s something we can check so you can stay on schedule with regular maintenance.  

Make sure your fuel filter is doing its job so your engine can keep doing its job. 

Folsom Autotech
1126 A Sibley St
Folsom, California 95630
(916) 985-0274